Self-adhesive entrance cleaning mat for heavy equipment – grey

Anchor Safe Lift Truck Mat

• Effectively remove moisture and dirt from forklift truck wheels to minimize slip hazards.
• Ideal for use in areas where forklift trucks enter and exit buildings.
• Two-level surface effectively removes moisture and dirt from forklift truck wheels, increasing forklift truck safety.
• Modular mats are easy to install and adapt to the given space.
• Adhesive tape system prevents the mats from moving
• Polypropylene mats are easy to clean and dry quickly.
• Durable rubber backing and polypropylene carpet board withstand forklift truck operation up to 6 000 kg.

Recommended for all buildings where forklift trucks must enter and exit the building.
Mats are available in Charcoal color.

Recommended use:

Recommended for use in dry or wet environments where dirt, soil, water may be present.

Ideal for warehouses or any buildings where forklift trucks must enter and exit.

Available size:

115x170 cm

Technical information:

• FIBER TYPE: Solution-dyed polypropylene (recycled PET fiber)
• BACKING TYPE: SBR rubber, 20% recycled tire rubber
• WEIGHT: 5 kg/m²
• THICKNESS: 8.6 mm
• SIZE: 115 x 170 cm
• MOISTURE BARRIER: Polyester film

• minimum order: from 1 pc

MAINTENANCE INSTRUCTIONS:

• VACUUMING: Vacuum regularly with a commercial vacuum cleaner –

Commercial wet/dry vacuum is recommended in areas where there is snow or heavy rain.

•EXTRACTION CLEANING: Extraction cleaning using commercial-grade machine is the preferred method for deep cleaning mats on-site - Regular scheduled extraction cleaning performed once every 4 to 12 weeks in high-traffic areas will help reduce dirt and wear patterns.

•PRESSURE WASHING: Pressure washing can be used for intensive cleaning - Take mats outside or to a space designated for pressure washing. Old type installation should be removed from the floor and mats - Pressure washed mats should be hung to dry - Mats should be dry before reinstallation

INSTALLATION INSTRUCTIONS:

•Place the mat face down with the rubber back side up.
•Tape along all 4 sides of tiles as close to the edges as possible. Inside the rectangle, create an X by placing tape with the adhesive side down (blue side up) from one corner diagonally to the opposite corner.
•Then place the mat in the desired position. Carefully fold one half of the mat back, revealing the blue tape.
•Remove the blue backing and trim it back to the folded area. Then fold this half back in place and repeat on the other side.
•To ensure the bond between the tape and tile, press on both sides of the tile. At this point, the tile installation is complete.

Technical sheet: