Anchor Safe Lift Truck Mat - gray

Anchor Safe Lift Truck Mat

• Effectively remove moisture and dirt from forklift wheels to minimize the risk of slipping.
• They are ideal for use in areas where forklift trucks enter and exit buildings.
• The two-level surface effectively removes moisture and dirt from the forklift wheels, increasing the safety of the forklift.
• Modular mats are easy to install and adapt to their application.
• The adhesive strip system prevents the mats from moving
• Polypropylene mats are easy to clean and dry quickly.
• Durable base rubber and polypropylene carpet board can withstand forklift operation up to 6,000 kg.

Recommended for all buildings where forklift trucks must enter and exit the building and exit.

The mats are available in Charcoal.

Recommended use:

Recommended for use in dry or wet environments where dirt, soil, water may be present.

Ideal for warehouses or any building where forklifts need to go in and out.

Available size:

115x180 cm

Technical information:

• FIBER TYPE: Solution-dyed polypropylene (recycled PET fiber)
• SUBSTRATE TYPE: SBR rubber, 20% recycled tire rubber
• WEIGHT: 5 kg/m²
• THICKNESS: 8 .6 mm
• SIZE: 115 x 170 mm
• MOISTURE BARRIER: Polyester film

• min. order: from 1 pc

MAINTENANCE INSTRUCTIONS:

• VACUUMING: Vacuum regularly with a commercial vacuum cleaner –

A commercial wet/dry vacuum cleaner is recommended in places where there is snow or heavy rain.

•EXTRACTION CLEANING: Extraction cleaning using a commercial grade machine is the preferred method for deep cleaning of mats on site - Regularly scheduled extraction cleaning performed once every 4 to 12 weeks in high traffic areas will help reduce soiling and wear patterns.

•PRESSURE WASHING: Pressure washing can be used for intensive cleaning - Take the mats outside or in a space designated for pressure washing. Old type of installation should be removed from floor and mat - Pressure washed mats should be hung to dry - Mats should be dry before re-installation

INSTALLATION INSTRUCTIONS:

•Place the mat face down with the rubber back facing up.
•Adhere the tape along all 4 sides of the tiles as close to the edges as possible.Make an X inside the rectangle by placing the tape adhesive side down (blue side up) from one corner diagonally to the opposite corner.
•Then place the mat in the desired position. Carefully fold one half of the pad back to reveal the blue tape.
•Remove the blue liner and trim it back to the folded area. Then fold this half back into place and repeat on the other side.
•To secure the bond between the tape and the tile, press down on both sides of the tile. At this point, the tile installation is complete.

Technical sheet: